Hotrodders.com Project of the Week
To see our Project of the Week archives, click here.

Part 6: Rearend and Brakes
1950bulletnose

Bear Racing axles and a rebuilt 8 3/4" sure-grip 3rd member were installed in the differential housing. New '96 Intrepid 11" rotors with the centers machined to fit the axle ends were bolted on. Also, 1/16" was machined off the diameter of the rotors to accept '87 Trans Am calipers and Trans Am modified backing plates.

Here's the left rotor and backing plate.

 


Here's the right rotor and backing plate.

 


Click here for Part 7: Steering Linkage and Pedal Assembly


Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22

Record your hotrodding project in our Hotrodders Project Journals. Add photos and information as your project progresses. Easy to use, and completely free. Click here to check it out.

---