Hotrodders.com Project of the Week
To see our Project of the Week archives, click here.
Part 10: Remote Hydraulic Tilt Front Clip I
I've cut off the fender braces on the firewall, cut off the body to cowl lip and filled in the kick panel vents. I'm presently smoothing the firewall and I've tack welded the bottom portion of the left fender to the firewall in preparation to boxing in the step where the front clip will rest.
The firewall is getting smoother using a build-up primer.
Click here for Part 11: Remote Hydraulic Tilt Front Clip II
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22
Record your hotrodding project in our Hotrodders Project Journals. Add photos and information as your project progresses. Easy to use, and completely free. Click here to check it out.
|Hotrodders© 1999 - 2012 All Rights Reserved|