1941 ford business coupe
Guys I'm new here and looking for help as I am rebuilding a 41 business ford coupe, that is in very bad shape, I need the spec. of the width of the floor pans and the outside spec of the rockers from front to rear & side to side. I know it has a wedge shape.
the floors and rockers are rusted out . I have new street rod pans & rockers and lots more.
Also to help others I have Fatman building a new frame for me from my old frame. Ford said that the 41 frame was changed from 112 "" to 114 long and apt .500 wider. than the 40.
Any help on the sheet metal spec. would be a big help.