Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (
-   Hotrodding Basics (
-   -   26 Ford Sedan Delivery (

26 TSedandelivery 06-13-2019 10:44 AM

26 Ford Sedan Delivery
I recently acquired a fiberglass Model T sedan delivery. Since I don't know who the original builder of this vehicle was. I can't locate the manufacturer of the body. Searching the internet has only yielded Model A and newer bodies. I am looking for a dash board as I would like to change the gauge layout. I really like the car overall just want to make small changes and improvements here and there.
Specs: Buick V6/350 turbo, 4" drop tube axle. 9" Ford, 4 wheel disc brakes.
So if anyone knows who produced this body or a source for a new dash, I would greatly appreciate it.

RWENUTS 06-13-2019 03:22 PM

Show us what you got and maybe somebody will make a suggestion.

delawarebill 06-14-2019 06:51 AM

not many repop body company's
1 Attachment(s)
so if u can guess what yr it is would help. (meaning built date)i have a real issue with someone that builds a st rod and has not paper works..
yes a pic of dash will help. there is a company that still builds bodies in northern Alabama. of course i can't remember the name.

rip-tide 06-14-2019 07:14 AM

2 Attachment(s)
Try searching images: using the term 26 Ford Sedan Delivery dash board

I looked a bit and saw some pictures, The dash looks like it has flat surfaces. Allowing any configuration for the instruments and switches, you might imagine.

Plenty of room to work, with if unable to fab a panel or insert, there are many

Some shots of one I did a while back

26 TSedandelivery 06-14-2019 07:32 AM

Yes, the dash is flat similar to a 32 Ford dash. I was looking to replace it with a new dash from the manufacturer instead of adding a panel over the top of the original one. This is what I may have to do.
Thanks to everyone for their help and suggests.

26 TSedandelivery 06-14-2019 07:35 AM

2 Attachment(s)
From the title I think the car was built about 8 yrs ago, but who knows when the body was purchased.

CaptMike 06-14-2019 08:34 AM

Superior Glass Works here in Molalla Oregon had a fire in the 'Glass Bay after hours. All of their molds and parts are gone. My one piece front end form my '37 Chevy Coupe was in the middle of the floor and still in the mold. It survived with a little crispy on the Cowl.

I have a good friend that has his work shop in his back yard. He has many metal parts late 20's & 30's primarily. I know he has a T shell and some other parts up on the top off his storage rack. I can call tonight and ask if he has a metal dash.


CaptMike 06-19-2019 07:54 PM

Ron only had one dash and it's spoken for.

Have you tried Speedway, Jegs etc. ?

silver74vette 06-20-2019 09:16 AM

If the dash is fiberglass have you thought about filling the existing holes and redrilling?

All times are GMT -6. The time now is 07:43 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.