Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Brake proportioning valve ?
View Single Post
  #2 (permalink)  
Old 08-04-2019, 11:28 AM
CaptMike's Avatar
CaptMike CaptMike is offline
Capt Mike
 
Join Date: Nov 2018
Location: 25+ miies from Oregon City Oregon
Posts: 114
Wiki Edits: 0

Thanks: 0
Thanked 53 Times in 42 Posts
53 3100

I have to Laugh at myself. I just re-red the Wilwood instructions as it's time for me to adjust my p valve.

When We first installed new calipers ETC, we couldn't get the P valve adjusted...

Then We read the instructions,,, not what I first though when We installed new disc brakes and this P valve.

This part is what got me...

Hope this helps..

The knob rotated all the way out (counter-clockwise) will provide a maximum pressure REDUCTION

Rotating the knob in (clockwise) will incrementally increase line pressure, up to full pressure.

The adjusting knob is marked with an arrow indicating the direction required to decrease line pressure to the calipers.

The knob rotated all the way out (counter-clockwise) will provide a maximum pressure reduction of 57%.
Reply With Quote