[backardracer]

there web site is still down do any of you know if some of the other stones were interchangeable whith the Hall Toledo valve seat grinders

[BogiesAnnex1]

Originally Posted by backardracer

there web site is still down do any of you know if some of the other stones were interchangeable whith the Hall Toledo valve seat grinders

Try again http://www.hall-toledo.com/index.htm

Bogie

[[email protected]]

Try www.Goodson.com

[backardracer]

the hall toledo page is still down i was just hope to get some stones for this thing kinda soon dont know how well it will work with newby hands but i have a few 882 head to practice on
and i couldnt find any thing on goodson web site
has any one used one of these seat grinders befor and any tips would be very help full to me thanks

[jaksm1]

I know this post is older but I am going to offer free of charge to anyone who emails me at [email protected] any and all Hall Toledo EJ Manuals I have. I have taken the pain staking time to rescan and clean up each of these documents to make them like new! These are mostly documents out of the 1950's but some newer and were badly deteriorated. They are in PDF format.

Thanks,
Jack

[4 Jaw Chuck]

Thank you Jack!

You can always upload the files here for all if you like, just add the files to your photo journal.

Considering the equipment is long out of production and parts NLA I think that would be OK.

Here is a link to where you can create a photo journal for the upload.

Hotrodders Project Journals

[jaksm1]

Actually I just decided started a Yahoo Group for the Hall-Toledo Model EJ Eccentric Valve Seat Grinder. I have 7 PDF type manuals for this machine that I took the time to scrub and clean to make them like new more important readable. These manuals go back as far as the 1940's and a few from the mid to late 1950's and some from the 1980's. I also found some wire tag type cards that were more than likely fastened to it when it was new, those have been scanned to a PDF format as well. These documents are provided free of charge.

The reason for the yahoo group is most of my files are too large to upload here...

Ive been in communication with the owner of the company and he gave me his blessing to spread this info around!

Regards,
Jack

https://groups.yahoo.com/neo/groups/..._groupurl/info

[jaksm1]

Sorry the above link does not work. I am posting a new one you may have to copy and past it into your browser or add https:// in front of it.

Thanks
Jack


groups.yahoo.com/neo/groups/hall-toledo_groupurl/info