This is my first T-bucket build. I picked up a bare frame and a stretched 24 T body from street rod fab in Sorrento Fl. The engine is a Targetmaster crate engine that I bought slightly used.I replaced the timing chain,and installed the 4-71 blower,otherwise it is stock. The trans is a turbo 350,with a 2500 stall converter.both bought used. The rear end is a 67 bronco 9" with 78 bronco 11" rear brakes added.The front end is Model A ford axle with split Model A wishbones.It has 41 ford spindles with GM disc brakes adapted to it. The steering box is corvair,which I reversed.I made the steering column from a piece of roll bar tubing,with a corvair turn signal switch.I made the windsheild frame out of 7/8 aluminum,machined the glass channel and had a local glass shop fit the glass. The seat is from a dodge caravan,cut down to fit.the speedway poly tank is covered with a stainless cover made from the side of a commercial ice machine.The bed is 26".it started out as an 8' bed off a 40's studebaker truck.I cut it down and used the bed floor from a 2000 ford ranger.The tailgate is a front bed panel from the same 2000 ranger.The tail lights are 39 chevy led's.