|01-14-2019 08:43 AM|
|01-14-2019 07:10 AM|
|08-28-2017 12:13 AM|
|JeffB28||Here is a unit installed in a 1953 Ford Car. Post # 12 https://www.jalopyjournal.com/forum/...dd-on.1019325/|
|04-16-2017 10:52 AM|
|Fang16||I have no idea of weight. I can say it's not much at all. My guess would be 5-10 lbs. I'm not concerned with weight at my age.Don't even have a bathroom scale. lol|
|04-16-2017 09:08 AM|
|johnsongrass1||This would be something I've considered adapting my my race car. Do you know how much it weighs?|
|04-16-2017 08:40 AM|
|Fang16||No. The only sound I hear, if the car is not running, is a click about 10 seconds after I turn the key on. The car is way to loud to hear anything when it's running. lol I have turned the wheel with the car not running and heard nothing.|
|04-16-2017 08:31 AM|
Just out of curiosity, can you hear it when it's working?
|04-16-2017 08:03 AM|
I was looking from some picture of the finished install!
It would be great if you can take some and post it!
|04-16-2017 07:29 AM|
|Fang16||I don't have that many pix. Here are some for size reference.|
|04-15-2017 01:45 PM|
Please post and share pictures of your mod!
|04-15-2017 10:47 AM|
|Fang16||Completed the EPS install on my straight axle 41 Willys. It's a pure pleasure to drive now, especially in slow tight turns. It is a great help to a handicapped person. Handles great on the roads and at the track. Used one out of a 2008 Nissan Versa. Having a brother that is a gunsmith with lathes and milling machines was a big help.|
|02-27-2017 04:02 PM|
|02-25-2017 08:27 PM|
Thanks for the reply. Your wires are red, green, tan and purple. Do you know which of your colors are ground? Figuring that red is power. I wonder how those colors would correspond to my red, yellow, black, and white?
Worked on an Isuzu once, wires changed colors at ever connection throughout the car. Was a real joy to find a short/open in it.
|02-25-2017 07:36 PM|
See the picture of my Versa ECU. The Orange wire is the Ignition On +12V. You will need the little small wire harness that goes from the ECU to the Torque Sensor.
|02-25-2017 05:52 PM|
2007-2009 Nissan Versa wiring
Using the 2007-2009 Nissan Versa EPS but didn't get any wiring or connectors with it (ebay). I have your 2008 Nissan Versa wiring jpg but not sure which pins are the correct ones for the torque sensor wires on the the EPS module pins. The torque sensor has wires (red, yellow, black and white) but they terminated at the column mount.I have included a pic of my EPS module if you'd be so nice as to head me in the right direction.
Also, the motor wires were connected to the left most pins and I'm not sure if this correct.
Been trying to find a 07-09 versa in local salvage yard to get connectors and wiring from but no luck yet. Not really sure what size the pins in module are either. I think .061/1.2mm?
Thanks for all your help.
|This thread has more than 15 replies. Click here to review the whole thread.|