|02-27-2019 03:44 PM|
|AutoMech||Thanks guys, I figured itíd be ok with two heat barriers, I was thinking about the hot soak temps but the truck is efi with a return system and it moves a lot of fuel so I think itíll be ok|
|02-27-2019 03:41 PM|
|lmsport||Heat soak might be a problem on hot shutdown|
|02-27-2019 01:57 PM|
Click on above. I've used this stuff and it works great.
|02-27-2019 01:16 PM|
|silver74vette||That does not sound like an issue to me as long as they are supported, Especially if you have radiant heat insulation installed.|
|02-27-2019 12:38 PM|
Minimum distance between exhaust and braided stainless fuel line
Is there a rule of thumb minimum distance between exhaust and braided steel fuel line? About 10Ē after my driver side header collector my fuel feed and return lines cross over the exhaust system, they donít run the length of the exhaust, they just cross over in one spot. There will be about 3-3.5Ē inches of clearance between the pipe and hoses, I have a Velcro type heat barrier to put around the hoses plus there is a factory aluminum shield that will be under them. I feel this should be a non issue just curious if there is a minimum safe distance. Thanks.