|05-15-2011 03:53 AM|
Sorry Racerray1. I have never come across any parts for your Desoto. In Nova Scotia mother nature has laid claim to most pre 1990. Slim pickins.
|05-14-2011 12:37 AM|
best wishes with your '32.
i'm wondering,,since your pecking away at desoto stuff,
is that i have just purchseda 56 desoto fireflite,, but it needs all the running gear to include radaitor>>>>. back -and of course needs a drive shaft too;
any chance you ran accross a parts car or engine trans etc,,, for my 56 >?
ray------- st.pete fl.
|08-10-2008 05:23 AM|
|60 grit||I will post some pics as soon as I can figure out how. Thanks for your replies.|
|08-10-2008 12:59 AM|
Fatman Fabrication make front end clips for cars that were butchered, for alot of odd rods. Give em a call. Keep it Mopar powered, Please
|07-30-2008 04:28 AM|
Thanks I will post pictures as soon as I can.
|07-28-2008 01:11 PM|
|F&J||If it is a full fender car, I'd be looking for another 32 frame. The fenders and front sheetmetal need a 32 frame to fit correctly.|
|07-28-2008 09:51 AM|
|speedydeedy||Post some pics of the ugly splice. Does the Nova width seem right for the car?Can you weld and fabricate?|
|07-28-2008 08:53 AM|
In all my searching I feel this is the best site for me. Years ago my 32 Desoto frame had been cut and a Nova rear steer front clip welded on. Never completed. I now have this car and don't know what to do with it. The welding of the clip onto the frame is very ugly and bulky. The tails of the clip are under and outside the original frame. I do not have the original front piece of frame. Any suggestions would be welcome. One suggestion was use a S10 frame.