|10-10-2019 07:17 PM|
The drivers back rest is next. The frames so far have been decent but the springs are pretty sad.
I think my plan to swap over to foam is a good one. When I get into the interior, all this will go. I will sand blast the frames and start over from scratch.
I'm not sure anyone can make heads or tails out of this picture but the lower corner of the back rest is pretty badly deteriorated.The drivers window was broken and the rain blowing in has taken it's toll.
|10-10-2019 07:06 PM|
While Steve is getting the front fenders ready for paint, I am trying to get a seat to sit on.
My intentions are to remove all the springs and convert the seat to 100% foam but that will have to wait until I get into the interior.
I got it stripped down and repaired several broken springs. Also, tied the springs together to stiffen them up a bit.
Added a layer of burlap to protect the foam and then a layer of one inch foam cut the the size of the seat.
I failed to get a picture but next came another layer of foam laminated to the first one. It was extended about three inches beyond frame, turned under and hog ringed to the spring assembly..
That is then covered with muslim, giving me a good foundation to sit on with an acceptable shape.
I bought a couple of inexpensive Mexican blankets to put over the seat but am going to hold off until I get the back rests in usable condition. Hopefully I can make the pattern align somewhat between the cushion and back rest.
|10-09-2019 01:04 PM|
Now look what Steve went and done to our perfectly good paint job........
Now that he knocked all the good shine off it he has moved on. Go figure..
I carried Steve up some color sanding paper I had today. We are planning on getting together next week and playing with the Chemical Guys compounds I have. I also bought a new set of Hex-Logic buffing pads when I painted the firewall. I really liked them but time will tell whether or not Steve likes them as well as I did.
He almost has the front clip ready to paint. This thing is going to be painted and cut and buffed before you know it.
|10-06-2019 10:39 PM|
|NEW INTERIORS||look's great Mr.John.. it's always a great feeling when you reach this point of the build and start to see that all the hard days and nights are paying off..You came a long ways and your headed down hill now.. It look's great..|
|10-06-2019 10:26 AM|
That is SOOOO COOL to see John!
|10-04-2019 05:53 PM|
Thanks guys. I was really apprehensive about painting it yesterday with it getting up to 98* or what ever it was. Man, I liked to melted in the paint booth.
I threw retarder in the third coat of clear and about 10% reducer plus retarder in the fourth coat. Apparently I guessed pretty well. It flowed out really well. It is a wonder I didn't drip sweat all over it.
When I started this project, I said I was going to use all SPI products on the car. I have done that, with the exception of the Wanda for the Champaign part. I have to say, I have no regrets. Every product I used from SPI has been first class, as well as reasonably priced. Not to mention the service and tech support they offer. It is rare, this day and time, to find any company so impressive to do business with.
|10-04-2019 05:07 PM|
|idrivejunk||I made out-loud man grunts of approval at the pics, John. Sure is great to see your vivid red convertible out in the sun. Its like seeing a favorite cartoon character come to life.|
|10-04-2019 03:29 PM|
|10-04-2019 03:28 PM|
,Barb will crack the whip and keep you straight,,,you are making progress ,I am lagging behind,
|10-04-2019 03:07 PM|
This is just amazing to be able to see it coming together like this.
Just a few shots to show why I am so tickled.
Moving on now to the front clip. I know I have already said it but I am so pleased that Steve invited me to shoot the paint after he has done all the grunt work. It really makes me feel like I am still a part of this project..
|10-04-2019 02:55 PM|
Yesterday I had the pleasure of painting the doors and deck lid for Precious. I know it doesn't look like I helped in these pictures but I promise I did.
You know, Someone had to take the pictures.
Of course, someone also had to supervise.
I couldn't stand it and got Steve to pull it out into the light of day!
|10-03-2019 05:07 PM|
Today I had the pleasure of painting the doors and deck lid for Precious. 4 coats of SPI dark red And 4 coats of SPI Universal Clear. All went well and I will have pictures in a day or two.
Steve had already clear coated the underside of the deck lid so that made my job easier.
It was again good to be able to do some hands on work on the car.
|09-22-2019 08:20 AM|
That looks great and the 54 tail lights are a plus,,the paint looks like it flowed out great,,i like the Iawatha,they put out enough paint with out over doing it and making a big cloud in the booth like mine,,,i still use a Binks #7 anf a Snap On,,basikly a Sharp,,it looks like a London fog when using them..
As always great job John and Steve..
|09-22-2019 05:59 AM|
Wow, she's looking real good....I feel like a car perv ogling her the way I am.....
|09-21-2019 09:55 PM|
|idrivejunk||You wanna know something else? I think those tail lights are perfect. They look great.|
|This thread has more than 15 replies. Click here to review the whole thread.|