|05-20-2004 10:29 AM|
Thanks Willys, that's exactly what I was looking for.
Nah just a 600 cfm holley 4bl to a 351W. I know, I know 1/2 is WAY more than I need, but the fuel cell I have already has 1/2 in. outlets. So I figured I might as well run the 1/2 all the way to the carb and reduce it there than have to buy 1/2 in line AND 3/8 line if I reduced it at the cell.
I probably did the dumb thing, but it makes sense to me I guess.
|05-20-2004 10:14 AM|
1/2" fuel line, what are you feeding, a Rolls Royce Merlin?
|05-20-2004 09:28 AM|
Try these. Either the spring type or the 'one had' type should work.
|05-20-2004 09:00 AM|
Tubing bender for 1/2 in.
I can't find a tubing bender to do 1/2 in. fuel line ANYWHERE. Looked at Summit, AutoZone, Pep Boys. I got the fuel line at summit and they don't even have the tool to bend it? What gives?
Anyone know where I can pick one up, or can I somehow use a 1/2 in. drill bit to make my own somehow?