|09-08-2015 11:17 AM|
|bullheimer||i pulled a wheel off and tried one. they must be the smaller ones, hole centers were not big enough. so the hole issue didn't come up. now i get to sell them off. more junk laying around the house till then|
|09-07-2015 09:00 PM|
|enjenjo||If they are from a Skylark Grand Sport, they won't fit, they would be a 4 3/4" bolt pattern. If they are Riviera Grand Sport, they will be 5" bolt pattern and will fit. The factory Grand Sport Riviera wheels don't really have a center hole, the center is cone shaped, and they might fit without modification.|
|09-04-2015 09:15 PM|
|bullheimer||somebody just gave me 4 factory buick mags off a Grand Sport. they wont go on, i'm sure because of the size of the middle holes on my car, but i am just wondering what the hole centers are on them if anyone knows. thx|
|09-04-2015 01:34 PM|
|hp246||Any Machine shop can open these up for you. Just had a wheel done for a project. Anywhere from $25- $50 each.|
|09-04-2015 11:44 AM|
|bullheimer||that is exactly what they did with a torch, if you look closely|
|09-01-2015 03:02 PM|
|enjenjo||As I recall the 62 Buick had a larger center hole than the later ones, and many custom wheels won't fit unless the pilot is turned down, or the center of the wheel opened up.|
|08-26-2015 01:39 PM|
|08-26-2015 12:23 PM|
custom wheels. why dey do dis?
1962 buick LeSabre. just wondering Is it that hard to find a wheel for one of these old wrecks?