|02-07-2018 12:37 AM|
|Frankie desoto||Sorry stuV the email is [email protected]|
|02-07-2018 12:26 AM|
|Frankie desoto||Don't have enough postings to do private. Here's my email [email protected]|
|02-07-2018 12:01 AM|
|StuV||Yes I still have the distributor machine LED kit and it will work with ANY machine including the MDT. If you contact me privately I can give you the details.|
|02-06-2018 11:09 PM|
|Frankie desoto||Hey stuV do you still have the led upgrade for the sun distributor machine and will it work on a mdt.|
|06-18-2017 12:18 AM|
Sent from my SM-N910R4 using Tapatalk
|07-13-2016 12:11 AM|
|StuV||YES, it will work on the model 504.|
|05-23-2016 02:24 PM|
I'm sorry, I thought you could glean it from clicking a user name.
|05-23-2016 01:31 PM|
Hi Dan Tim
If you supply me your email address I will be happy to send you the installation instructions. You should be able to determine if it will work for your machine from that.
|05-23-2016 06:48 AM|
Sun 600 Dist Machine
Can you email me the pdf, will it fit the 600 model
|05-16-2016 08:22 PM|
|StuV||If you would like to contact me privately with your email address, I would be more than happy to send you the changeover instructions. It's a 3 meg pdf file with complete instructions and pictures. From that you should be able to determine if it is suitable for your machine.|
|05-16-2016 07:53 PM|
sun distributor machine
How about a little more info? What's involved in the changeover? Will it work on my 506? And, of course,
what kind of expense is involved?
|05-16-2016 10:30 AM|
I have converted a model 504 with faulty flashtube to LED. If anyone is interested I can supply a kit to do this. It eliminates/replaces all the old high voltage electronics. Many different models use the same circuit as the 504. PM me if interested.
|01-24-2014 11:13 AM|
Can i both trigger on the Green the stobe light and fire the coil at the same time or will i get 12v thru the coil and damage the internal workings of the Sun, maybe do one or the other but not both?
The Red and Green wires joined and connected at the post is what is giving me pause.
|01-24-2014 09:24 AM|
The stud on the left is isolated and something clips to it - i think the alligator clip from the internal strobe light of the machine clips to it.
What hooks into the plug/connector - the box has no seperate power supply, one of those wires must be +12v supply for the box and the other 2?
|01-18-2014 12:41 PM|
I probed the connector and couldn't read any voltage. The pigtail has been added so I guess i need to go inside the machine to see where and what it is doing. I didn't see it when i redid the mechanicals and table etc, I didn't have that side of the machine apart.
It looks like a ford plug to me, anybody recognize it?
|This thread has more than 15 replies. Click here to review the whole thread.|