|08-10-2018 08:44 PM|
Thanks ...at least my mind is more at ease when I order parts. Like I said it was probably a moot point but I had to ask. Thanks again... Ron
|08-10-2018 05:54 PM|
I'm going to say Camaro/FireBird. I don't think it is '75-up Nova as the frame ends are not correct, the Nova has different ends because it has bumper shock absorber units.
Really doesn't matter though, the front steer F-body and X-body subframes use all the same parts as far as bushings, shocks, spindles, brakes, balljoints, steering parts, etc. About the only difference is spring rates and the diameter of the front sway bar, Camaro/Firebird is typically stiffer sprung and larger diameter bar, unless your subframe came out from under an SS Nova.
|08-10-2018 04:46 PM|
Thanks for the Nova info... maybe it is a Nova after Attachment 433961
Attachment 433971all. Am going to try and send pic. Not a computer whiz so don't bank on anything yet.
|08-10-2018 12:21 PM|
Make sure you take pictures of that area too.
|08-10-2018 11:51 AM|
Nova was front steer starting in 1975.
Pics will clear it up.
|08-10-2018 11:03 AM|
|rojo56||Hadn't taken any pics yet but will try and get to it this morning. Also read that the nova is a rear steer and mine is a front steer so guess I'm back to a 75-80 Camaro. Like I said this probably isn't as important as I'm thinking but would still like to know. Will get the camera out and start shooting pics. Thanks.|
|08-09-2018 11:14 AM|
A picture would help . . .
|08-09-2018 10:19 AM|
This may be a moot point but I bought a chevy (?) clip for a 55 s1 chevy pickup winter project . The fella I bought it from couldn't remember what it came out of . Thought maybe a 75 - 80 camaro maybe ??? Took the part numbers to a chevy garage but they couldn't help. The hub to hub measures 60.25 which points to a Chevy II or nova. Steering is 2.25 lock to lock. Is there any way I can identify this clip or does it really matter. My peace of mind and parts ordering seems to be the biggest hurdle. Any suggestions ? Thanks