|11-20-2018 05:22 PM|
out what i wanted right on the spot,Very happy with the "new" Ididit.Will go back- new owners.Cost me very little. less than. thanks long john bob s
|11-20-2018 05:21 PM|
out what i wanted right on the spot,Very happy with Ididit.Will go back new owners.Cost me very little. less than. thanks long john bob s
|11-20-2018 04:31 PM|
I found it by getting my ID and OD measurements and then searching Ebay for what I needed. Actually, I also found a roller bearing with the right demensions for something like 10 bucks.
|11-20-2018 01:16 PM|
|bsa_bob2||thank you -chasracer- much appreciate the tips bob s|
|11-20-2018 01:02 PM|
|chasracer||Might try S&W racing or Chassis Engineering - they have steering column kits that have nylon bushings - not sure about size but they might sell you a bushing by itself.|
|11-20-2018 12:30 PM|
Need nylon steering column bushing.
Its good to go now! Iam looking for a bushing to fit my "van column"Cut it wrong . bob s
|11-20-2018 12:17 PM|
Nope, I do not but thanks for asking.
|11-20-2018 12:06 PM|
Need steering bushing?
I am shortening up A van column for my 55 chevy.Anyone know where i might find "nylon bushing" size or close. I can modify ....i think~~. This is a tilt van column..just in case thank you
Size is; 3/4"Shaft hole and 1.75" o/s diameter 2-3" long. thanks bob s