|04-19-2019 08:35 AM|
I only have one job to do and may never do another one I got a bender from Harbor Freight that is similar in pattern to the Imperial. Works fine just oil the dies a bit so the shoe of the bender slides easier.
|04-18-2019 07:46 AM|
|04-17-2019 08:38 PM|
The Imperial brand of benders (the ones I use) are also good quality, but not cheap. Very similar to the Rigid one posted by Hotrod46.
|04-17-2019 12:34 PM|
I've had good results from this one:
It handles stainless and steel equally well. Not cheap, but good.
|04-17-2019 12:22 PM|
Hi guys.. I need a decent tubing bender that handles 3/8 steel line real well.. Current cheapy wants to kink them..