|08-28-2019 09:24 AM|
|08-28-2019 07:07 AM|
Having that type of wheel will make the job of finding a brake kit easy. Speedway Motors is a good source, Wilwood another.
Look around gather info, then plan, the front spindles should have 4 holes so as the brake bracket can be attached.
Seen in the photo is the spindle, on the left on the floor the bracket.
|08-27-2019 08:18 PM|
|68NovaSS||Moving to Brakes/Suspension forum.|
|08-27-2019 03:38 PM|
|Hdwodi||Would send pics but can't figure out how to over my phone. Have the pics here on my phone, if anybody can tell me how then i have all kibds of pics of the front end.|
|08-27-2019 03:36 PM|
|Hdwodi||Like a split wheel, with the hub in the middle.|
|08-27-2019 03:33 PM|
|rip-tide||First question what kind of wheels are on the front?|
|08-27-2019 11:37 AM|
|68NovaSS||Welcome to HR, post your brake questions in the Suspension, Brakes and Steering forum, you get your answers there.|
|08-26-2019 05:44 PM|
|08-26-2019 05:14 PM|
New here. Just got my 1st t bucket.
Need front breaks. But don't know what to get.