|02-18-2006 07:33 PM|
I used Lambert.
Tail lights are total custom design lens (by me) they (CNC machined). They built a special LED circuit board also.
Center-high brake light is a Lambert standard product.
Works great, looks great.
However, they couldn't make an enclosure for the circuit board.
They can make anything you want. You need to design it.
|02-18-2006 04:16 PM|
|02-18-2006 04:13 PM|
|02-18-2006 04:04 PM|
Here is the URL for Lambert's Website:
They make a pretty good product, There is some Construction plans on the site also..Worth a read.
|02-18-2006 04:00 PM|
Your URL wasn't Working, so I edited your post to fix it...In case your wondering what changed!
|02-18-2006 11:44 AM|
Try this site.
I installed a few of their 5MM bright leds in my dash to indicate fuel pump on [blue] , TCC converter engaged [white], and cooling fan on [aqua green].
Even though I used the correct resistor [560 ohm], they are so bright there is no way I can drive down the road with the fuel pump on [blue] led blaring me in the face. I had to install a resistor 39X as much (22K ohm} to dim the led down to a reasonable level.
|02-18-2006 09:38 AM|
LED tail lights, third brake lights ?
I'm looking at LED's for the hot rod. Does anyone know anything about Lambert Enterprises products? They have what I want, just curious if anyone has used thier stuff.