|12-13-2006 09:38 PM|
I have a Sharpe Titanium cg 1 and I love it. I also bought the HVLP cap for it so I use the HVLP for base and the compliant for clear..Pretty good system. I am using the 1.3 tip and with the compliant cap it lays down clear as good as any medium priced gun............GlennK
|12-13-2006 06:58 AM|
There are also several good Sharpe guns available as well. Much nicer - my low ender appears to have been made in Minneapolis.
Eastwood has many unique items, but, quite frankly, their prices IMHO, for standard automotive tool items is so far out of line it's laughable. It's the high cost of advertising.
Iwata and Sata's aren't cheap, but sometimes you can find a deal.
|12-12-2006 10:19 PM|
An excellent consideration would be the Sharpe Platinum, I have one and I must say lays down metallics flawlessly. It uses a 2000 air cap for metallics and a 3000 air cap for clears. The best part is it only uses 7.5 cfm of air. A very tough gun to beat for the money.
|12-12-2006 08:10 PM|
|confused||i like the finish line by devilbiss for a mid level gun.|
|12-12-2006 07:30 PM|
Eastwood has the Devilbiss Startingline on sale for $135 now. That's for a primer gun and a bc/cc gun.
I'm nearly ready to spray primer just on the body shell of my 34 Plymouth. I'm going to work on just one door or fender at a time over the next year to get each piece in primer. This will be my first attempt at painting. I plan to use House of Kolor products.
Any thoughts on this gun set?
Devilbiss Startingline on Eastwood
|12-11-2006 08:34 AM|
Check with the local paint stores as they get good used guns in all the time.
I picked up a LPH-400LV 1.4 for $190.00
They had 4 guns for sale, and they were Sats's & iwata's and in great shape.
|12-10-2006 02:02 PM|
|12-10-2006 12:55 PM|
The Iwata is well worth the money. Even if you only paint one car, and then sell it, you will get most of your money back. The time and material $aving$ are worth it.
|12-10-2006 11:35 AM|
|Jeffrey||Thanks guys! I decided to spend some extra dough and get the Iwata lph 400. Seem like a good investment to me. I currently own finnex and it sucks.|
|12-09-2006 11:21 PM|
|Ultra Al||How much CFM does your compressor have? If you are looking at HVLP you need, in my opinion, about 16cfm. You can get an Astro LVLP which is an Iwata knock off pretty cheap, like about $100 from Tool Paradise. I bought an Astro with a 1.9 tip for shooting primer, it is a Sata knock off, and it is a great gun for the money. If you can use an RP gun, the Devilbiss GFG plus is also a great value form Tool Paradise for about $270. Al|
|12-09-2006 09:57 PM|
|tab||I bought a cheapie purple handle gun at Harbor Freight for $15.00. Works great!|
|12-09-2006 06:59 PM|
IMO and just 1 step above rank amateur, have had good luck with these:
Devillbiss Finishline lll = good
Sharpe Finex FX300 = better
Others swear by the Harbor Freight 43430 purple gun, others swear at it - it is an air hog but works well within its design
|12-09-2006 06:33 PM|
|p8nter||ebay has a few Sata nr95 for around $200.00 . I have two of these over 8 years old, they both get used every day and have been rebuilt twice. If there was a paint gun hall of fame it might be the best base coat gun ever built. A used one is worth more than three new cheaper guns.|
|12-09-2006 12:14 PM|
|pepi||might want to take a look at eastwood they have devilbus (sp) for $150 a two gun set, interesting. Devilbus has be around for some years.|
|11-16-2006 07:08 PM|
Hey guys what are some good mid grade spray guns?
Looking to buy a new one, right now Im using a finnex.