Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - show me your home made tools so I can copy them!
View Single Post
  #73 (permalink)  
Old 10-16-2009, 06:22 PM
trees trees is offline

Last journal entry: JB's 37 Pickup
Join Date: Oct 2002
Location: Smoky Mountains
Age: 81
Posts: 2,354
Wiki Edits: 0

Thanks: 0
Thanked 4 Times in 4 Posts
Brian, we thought of the install tire, mask and paint, but decided against it. JB has friends through out this area and one of those has a wheel and tire shop. He took the new tires and freshly painted wheels to him. They installed the tires without the use of tools, only lots of slick'um so there was not a scratch on the rims. Additionally, they had pre spun the rims on the balancer to get an ideal as to how true they were. After they installed the tires, they spun the wheel and tire to check how much weight was required to balance. They would then reposition the tire and repeat until each wheel took the minimum weight. The end result was two wheels have no weight (they go on the front, two have less than 3/16 oz weight (they go on the back) and the spare has about 1/4 oz. Talk about service!!!

Reply With Quote