06-23-2015, 01:49 PM
Originally Posted by majorpain29
Im just looking for someone to check my parts list for my tbi to carb swap on my 1994 chevy k1500 with the 350.
I have a holley 600 cfm classic carb
holley 12-803bp fuel regulator
holley carb tps sensor for the 4l60e
edlebrock 2104 performer for the 88-95 trucks
misc fittings for the carb and fuel regulator.
im not sure if I can keep my throttle cable or if I have to order a new one for the carb.
I have the moates chip burner to tune my 1227747 ecu into a stand alone for the 4l60e
Is there anything super obvious Im missing for this swap?
Im planning on cutting the fuel lines close to the firewall and flaring them to run rubber lines to my regulator. That way if I don't like the carb setup or it doesn't run well enough to be a dd in harsh nh weather, I can convert back easy enough with some adapters to the tbi.
Also anyone who has done this swap, any tips or tricks or is it pretty straight forward from here?
I know this topic has been done a million times for tbi trucks, im just looking for someone to verify my parts list. Thank you in advance.