Tonight I finished wiring the dash harness. I used a spiral wire loom to bundle up all the wires. I checked continuity on each and every wire. I expect this car will ride like an old John Deere tractor so I'm bundling and securing the harnesses with hopes all will stay together out on the road.
I also attached the solenoid wire to the ignition switch which will run to the neutral safety switch then to the starter. The ignition resistor wire is also on the switch. I will connect the accessory wire and battery hot wire when the dash is in the car as those wires feed out of the main fuse panel.
The tach harness will be stand alone.
