Photo 1 -- The side of the transmission. The cast numbers (upside down)
Photo 2 -- The plate on the side of the transmission, after some of the
crud was rubbed off.
Photo 3 -- There it swings, about 5 ft. 6 in. long. The blue straps are
there just to help stability. I will use a hose clamp and oil jug to
cover that tail shaft. All openings will be closed, such as the brass
connector for the oil pressure gauge. The starter was put back on to
close that hole. The big oil bath air filter will also be put back on. I
don't intend to use this assembly, but I don't want it to ruin.
Now I need to find a place to store that thing.