Hot Rod Forum banner
12583911902.jpg

12583911902.jpg

  • 0
  • 0
12583911901.jpg

12583911901.jpg

  • 0
  • 0
12583911890.jpg

12583911890.jpg

  • 0
  • 0

1988 Suburban TH-700R4 to SM-465 Swap. - Nov 16, 2009

Photo 1 shows the modified original brake pedal all finished along with the 1980 piece in a better position to show the pushrod pin locations for reference.

Photo 2 shows a closer view of the above description.

Photo 3 shows after drilling the necessary 2 inch hole as measured from the 1980 floor section as seen earlier in my journal, and after assembling the clutch pushrod to the pedal and putting the entire assembly into the Suburban with a little more difficulty than removing the old one- as I now had the clutch pushrod and wider bracket to fit through the same space the old one was removed from.
There are no comments to display.

Album information

Category
Photo Journal
Album owner
M&M CUSTOM
Date created
Item count
3
View count
64
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

M&M CUSTOM

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top