Hot Rod Forum banner

bracing - Aug 18, 2006

I made an inner and outer reinforcing brace to hold the radiator shell and radiator together. There is a tab that attaches to the radiator support rod and a tab that goes up into the old filler neck, just in case the solder goes away on the upper tank remnant that is my mount. Then I made a bracket out of 1"x!" square tubing and some 1/4" x 1 1/2 flatbar to bolt to the radiator. The little hook looking things on the plates at the upper corners are the hood hooks. You set the edges of the hood side panels in them when the hood is open.
There are no comments to display.

Album information

Category
Photo Journal
Album owner
powerrodsmike
Date created
Item count
3
View count
44
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

powerrodsmike

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top