Hey Everyone!
Did a little bit more to the oven build and, almost done.
Finished off with the High Temp Silicone around the inner door frame. Just under the metal studs that go all the way around the inner door frame.
I completed the framing of the inner door window, it turned out great for my first time, I think.
I adjusted the hings for the door and, put some straps around the oven.
Just to get it to snug up against the door seal.
But I came into a little problem with being able to rivet the clamping hinge for the door....it seems to be a little thin in metal there and, I can't use the rivet gun...there is no room.
As you can see in the pictures. See what I mean.
I guess I'll have to reinforce that area...thinking of riveting some door hinges, as I don't have a welder....Yet!
All add pictures when I figure that part out and, what to do there.
Anyways here are some pictures of the build so far to this date. 9/14/2012
More to come.
Cobra427sc
