PIC 1: The patch panel tacked into place on the drivers pan. Its not pretty, but it'll do. I actually got to practice my hammer/dolly work on this piece since I had access to both sides of the panel. I still need practice! :-) Ultimately, most of the tunnel is going to be cut out anyways once I install the tranny (6-speed), but I need to have the floors solid for when I pull the body off the frame.
PIC 2: Drivers side pan installed (not welded) along with the passenger side pan. Not too shabby. It looks strange to me to have floors in it after two years..
PIC 3: Clyde... Enjoying the first 70+ degree day of the spring.
