Hot Rod Forum banner
12357911990.jpg

12357911990.jpg

  • 0
  • 0

Flow Bench-Orifice Measurements - Feb 27, 2009

Look's like lousy weather will come in on Sunday. So, i'll assemble the plenum, sides and bottom of the air box. Once the plenum is in the air box i won't have easy access to the orifice disc. So, i measured and tabulated all the holes in the orifice disc today. The table shows all the measurements and the number and average size of all the holes. Later on, these measurements will be used to calibrate the flow bench and to calculate flow rates from the measured pressure drops.
There are no comments to display.

Album information

Category
Photo Journal
Album owner
Ted B
Date created
Item count
1
View count
18
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Ted B

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top