Hot Rod Forum banner
12118566130.jpg

12118566130.jpg

  • 0
  • 0

Frame mod for trans - May 26, 2008

The center of the X-member was not big enough for the drive shaft and yoke to pass through. I fixed this by making relief cuts in the center of the X-member and inserting a 4.75" inner diameter tube. the plan is to hammer from the cut metal around the tube and weld it all back together to ensure X-member strength. Right now its mocked up and a few inches of tube will need to be removed from the back of the tube before everything is welded back together.
There are no comments to display.

Album information

Category
Photo Journal
Album owner
Rufus_2
Date created
Item count
1
View count
27
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Rufus_2

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top