A cold front is coming in. This may have been the last decent day to work outside. I think the front came in about 4, because it got pretty chilly.
I wanted to get the fuse box located and the dash removed. I can build the dash harness inside where it is warm this winter.
After looking at the underside for a while, it looked like the easiest thing to do would be to build a bracket to attach to the brake pedal support.
The scrap pile yielded a section of 2 x 3 rectangular tubing. After a few quick cuts and some drill and riv-nut work, I had my bracket. The tubing provides nice rounded corners to prevent wire chaffing.
With the bracket mounted and the fuse box installed, the dash wires were separated out and marked as to where they reached the dash. The dash was removed. A nice, cold winter's day project is ready to go.