Hot Rod Forum banner
11539193281.jpg

11539193281.jpg

  • 0
  • 0
11539193280.jpg

11539193280.jpg

  • 0
  • 0

Hemi Assembly-blower mock up - Jul 26, 2006

Here's a picture of the whole thing put together... Final setup is a 49 tooth lower pulley and a 56 tooth upper pulley for a 12.5% underdrive. This will give 8 pounds of boost and with the static ratio of 8:1, will give an effective compression ratio of 12.4:1.

I also have a Powermaster 140 amp alternator mounted low on the motor for now. Once this gets in the frame, as long as there are no clearance issues, I'll keep it there. Looks ugly mounted up high.

I'm going with a pair of BG Mighty Demon Blower carbs...650 CFM each, mechanical secondary, no choke.

Now all of this comes off. I'll be starting the engine for the first time with the original AFB Carter carb and stock Hemi manifold. Once I get it up and running, with timing set, I'll put on the blower. One thing at a time....
There are no comments to display.

Album information

Category
Photo Journal
Album owner
steve392
Date created
Item count
2
View count
81
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

steve392

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top