Hot Rod Forum banner
12546933671.jpg

12546933671.jpg

  • 0
  • 0
12546933670.jpg

12546933670.jpg

  • 0
  • 0

Interior - backer boards - Oct 4, 2009

Photo # 1. This is a shot of the driver’s’s side rear corner curves after application of the first layer. I let this layer dry overnight.

Photo # 2. This is the completed first layer on the large rear curve over the back window. You will note there are a few sheet metal screws still holding the wire mesh backing in place and to insure there is no accidental warping or movement during the drying process. I went around these screws with the first layer of fiberglass tape. But once the first layer is dry, I can remove these screws and tape right over the top of these areas with subsequent layers.
There are no comments to display.

Album information

Category
Photo Journal
Album owner
Cboy-Two
Date created
Item count
2
View count
41
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Cboy-Two

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top