Hot Rod Forum banner
12585083002.jpg

12585083002.jpg

  • 0
  • 0
12585083001.jpg

12585083001.jpg

  • 0
  • 0
12585083000.jpg

12585083000.jpg

  • 0
  • 0

Interior - foaming panels - Nov 17, 2009

Photo # 1 - Next I pull out the template and transfer the outline to another piece of card stock smoothing the edge lines from tab to tab.

Photo # 2 - After cutting out this second pattern and doing a test fitting (and trimming if required), I trace the pattern on the foam and cut it out.

Photo # 3 - I then pop the foam in place and trim if required. I’m making these with a fairly tight fit and the butt joints at the top and bottom of each section must be as precise as possible to reduce the possibility of telegraphing the joint through to the fabric when it is glued on.
There are no comments to display.

Album information

Category
Photo Journal
Album owner
Cboy-Two
Date created
Item count
3
View count
47
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Cboy-Two

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top