Hot Rod Forum banner
12554039872.jpg

12554039872.jpg

  • 0
  • 0
12554039871.jpg

12554039871.jpg

  • 0
  • 0
12554039860.jpg

12554039860.jpg

  • 0
  • 0

Interior - inserts - Oct 12, 2009

Photo # 1. Following the design, I next drill 1" holes at the ends of each “slot” I am putting in the insert.

Photo # 2. Once again using my angle grinder, I cut out the segment of each slot between the holes I drilled. This photo was taken right after the slots were cut in the panel. Some of the edges still need to be sanded straight and smooth.

Photo # 3. This photo might give you a better idea of the design I am going for. The brown areas (backer board) around the insert will be in upholstery and the slots will be in upholstery.
There are no comments to display.

Album information

Category
Photo Journal
Album owner
Cboy-Two
Date created
Item count
3
View count
33
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Cboy-Two

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top