After glassing the bulkhead it was time to build some kind of heater/de-mister ducting for those cold wet UK summers.
A Bedford Rascal donated the heater fan and matrix which was then modified to a smaller size making life easier to fit. The unit will blow from it`s 3 speed fan through the matrix and into to boxed area it sits on. This diverts the air up to the screen vents. As yet there is no lower vents but these will be installed by simply cutting a hole into the sides of the box and fitting vent outlets which have adjust-ability built in. The unit will not have any controls to divert the air, only hot and cold adjustments and fan speed.
