WE FABRICATED THE NEXT SECTION OF THE LEFT HAND 'A' PILLAR COMPLETE WITH HINGE MOUNTS INSTALLED. WE WELDED IT TO THE LOWER SECTION AND IT IS TEMPORARILY LOCATED WITH SCREWS TO CHECK THE FIT. WE COULD NOT GET THE SHAPE WE REQUIRED FOR THE 'B' PILLAR FROM ONE SECTION OF 25 X 50MM
SO WE USED TWO 25 X 25 MM SECTIONS AND JOINED THEM TOGETHER. WE BENT 4 OF THESE AT THE SAME TIME TO COVER BOTH SIDES. WE HAVE CUT AND SHAPED ONE PILLAR SECTION TO SUIT THE BODY PROFILE AND CUT A RECESS IN THE BACK OF THE PILLAR FOR THE STRIKER BOLT SLIPPER PLATE. WE ARE USING THE SMALL BEAR CLAW LOCKS.
AS YOU CAN SEE IN THE FIRST PIC MY OFF SIDER FINDS IT ALL TOO HARD.
