WE DECIDED TO REMODEL THE REGO PLATE RECESS TO SUIT OUR MOCK PLATE. THIS HAS RETAINED SOME OF THE ORIGINAL APPEARANCE THAT WE ARE TRYING TO KEEP. YOU MAY NOTICE THAT THE RIGHT HEADLIGHT IS HIGHER THAN THE LEFT. THE ORIGINAL GUARD MOUNTS ARE SLOTTED ALLOWING THE GUARDS TO BE ROTATED FORE AND AFT TO ADJUST THIS PROBLEM SO WE WILL DO THE SAME, THEN TRIM THE ENDS OF GUARDS TO MATCH THE ENDS OF THE PANELS ONCE EVERYTHING IS INLINE.
WHILE WE HAD THE WELDER OUT WORKING ON THE RIGHT HAND GUARD WE ADDED EXTRA SUPPORTS ON THE TOP OF OUR SEATBELT MOUNTING TOWERS. THESE WILL TIE INTO OUR ROOF FRAME WHEN IT IS BOLTED BACK INTO POSITION.
