Hot Rod Forum banner
13771255754.jpg

13771255754.jpg

  • 0
  • 0
13771255753.jpg

13771255753.jpg

  • 0
  • 0
13771255752.jpg

13771255752.jpg

  • 0
  • 0
13771255751.jpg

13771255751.jpg

  • 0
  • 0
13771255740.jpg

13771255740.jpg

  • 0
  • 0

New front crossmember - Aug 21, 2013

Decided to work on the front end. Starting with getting all the old junk out of the way. Torched off the rivet heads and drove them out with a punch. Removed old steering box, as I will replace the steering column and installing power steering. Note the large hole in the front crossmember where the radiator mounts. I'll have to do a little repair there.
I'm using a custom weld in crossmember/IFS kit from Speedway. Cheaper than some name brands, and appears the same. Came with the frame boxing plates. I must have measured a hundred times to get it perfect.
There are no comments to display.

Album information

Category
Photo Journal
Album owner
bbeins
Date created
Item count
5
View count
26
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

bbeins

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top