Hot Rod Forum banner
13288602205.jpg

13288602205.jpg

  • 0
  • 0
13288602204.jpg

13288602204.jpg

  • 0
  • 0
13288602203.jpg

13288602203.jpg

  • 0
  • 0
13288602202.jpg

13288602202.jpg

  • 0
  • 0
13288602201.jpg

13288602201.jpg

  • 0
  • 0
13288602190.jpg

13288602190.jpg

  • 0
  • 0

Radiator Fan cover - Feb 10, 2012

Designed the fan cover on CAD
Photo 1. Using 1.5 mm plate I cut all the pieces out.
Photo 2. Marked out the center plate then cut the circular hole out.
Photo 3. All four sides tack welded together & fitted to radiator to ensure it did fit.
Photo 4. Center section tack welded to the side frame.
Photo 5. Fan installed to the cover & installed to see that this also fitted.
Photo 6. The gap between the motor & fan is very tight, I should be able to get 1 inch clearance by the
time move everything around this should be enough.
There are no comments to display.

Album information

Category
Photo Journal
Album owner
Enigma10
Date created
Item count
6
View count
53
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Enigma10

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top