Hot Rod Forum banner
Add bookmark
finally got the engine set into chassis for final fit. Ran line from fuel regulator. Started disc brake comversion.

finally got the engine set into chassis for final fit. Ran line from fuel regulator. Started disc brake comversion.

  • 0
  • 0
panels back on loose. glass doors hung, glass hood/fenders setting on body.

panels back on loose. glass doors hung, glass hood/fenders setting on body.

  • 0
  • 0
stude tilt mounted and gaps checked/moved

stude tilt mounted and gaps checked/moved

  • 0
  • 0
stude tilt 4 Front fenders bolted to hood and hung/mounted on tilt front hinge

stude tilt 4 Front fenders bolted to hood and hung/mounted on tilt front hinge

  • 0
  • 0
stude door in primer

stude door in primer

  • 0
  • 0
stude door hung. Inner window/vent window/fuzzies and challel roughed in, inner panel glued to outer panel. Rough trimmed and hung in door opening.

stude door hung. Inner window/vent window/fuzzies and challel roughed in, inner panel glued to outer panel. Rough trimmed and hung in door opening.

  • 0
  • 0
Inner door layup for door. 2 oz. matt and 27 oz. cloth 3M resin.

Inner door layup for door. 2 oz. matt and 27 oz. cloth 3M resin.

  • 0
  • 0
has a couple of voids and a ruff front edge, a little more work needed

has a couple of voids and a ruff front edge, a little more work needed

  • 0
  • 0
right front fender made from a fleece/resin mold

right front fender made from a fleece/resin mold

  • 0
  • 0
fender mold left side. An experiment with fleece cloth and resin.

fender mold left side. An experiment with fleece cloth and resin.

  • 0
  • 0
body mock up

body mock up

  • 0
  • 0
hanging new quarters

hanging new quarters

  • 0
  • 0
goin back together

goin back together

  • 0
  • 0
stude on frame.

stude on frame.

  • 0
  • 0
stude body back on frame

stude body back on frame

  • 0
  • 0
stude cage rear struts.

stude cage rear struts.

  • 0
  • 0
Wired, almost all plumbed 1/2" fuel line. 3/16" brake lines. dual master cyl, line lock etc.

Wired, almost all plumbed 1/2" fuel line. 3/16" brake lines. dual master cyl, line lock etc.

  • 0
  • 0
stude cage bent up front struts and tacked

stude cage bent up front struts and tacked

  • 0
  • 0
Old SKOOL intake with 850 vac secondary carb.

Old SKOOL intake with 850 vac secondary carb.

  • 0
  • 0
On the stand

On the stand

  • 0
  • 0
Fired up OLD SKOOL 500 inch BBC. 620 lift hyd roller. 781 heads, big valves, ported and extensive bowl work. Sounds great!

Fired up OLD SKOOL 500 inch BBC. 620 lift hyd roller. 781 heads, big valves, ported and extensive bowl work. Sounds great!

  • 0
  • 0
many months of grinding and replacing metal. Finally in paint.

many months of grinding and replacing metal. Finally in paint.

  • 0
  • 0
stude gas tank just constructed from 20ga. sheet. Still wet with sealer/primer. Bottom side.

stude gas tank just constructed from 20ga. sheet. Still wet with sealer/primer. Bottom side.

  • 0
  • 0
Fresh from mold, rough trimmed.

Fresh from mold, rough trimmed.

  • 0
  • 0
Gelcoat, a layer of 1.5 0z. matt than a layer of quadaxial cloth. General purpose resin. Could not get the fold seam to lay down. Filled nose section

Gelcoat, a layer of 1.5 0z. matt than a layer of quadaxial cloth. General purpose resin. Could not get the fold seam to lay down. Filled nose section

  • 0
  • 0
BOBCRMAN@aol.com

Stud uh baker gasser?

Early photos of project
Click to expand...
There are no comments to display.

Album information

Album owner
[email protected]
Date created
Item count
54
View count
35
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

BOBCRMAN@aol.com

[email protected]

Media items
54
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top