The motor I'm using was originally put together in 1995.The original truck was damaged in 1998 by a hail storm and the motor has been sitting in storage mode ever since.The run down on it is as follows:
SBC 350 truck block with 4 bolt mains,steel crank,forged pistons(0.30 over),erson gear drive,comp cams 292 cam and matching valve springs,double hump angle plug heads with 1.60/2.02 stainless steel valves and full roller rockers,screw in studs and guide plates.
I took the motor to work to occupy my spare time and started to tear into it.I am just opening it up to make sure everything is okay,and then reseal it.
I was happy to see what it looked like inside.Almost all of it looks like brand new still.Took a few rags and some carb cleaner and cleaned the rest of it up.
I had also stripped the paint so I can repaint it later....