Now that the motor mounts were good to go, it was time to re-install the engine/trans for installation of rear crossmember.
First, I needed to finish up detailing the transmission. This was to be the final assembly of the trans to the engine, so I needed to do some painting.
First, the trans was cleaned using DX533 Aluminum Cleaner, followed by a few coats of DP50LF Primer. Next came the color coats of single stage Concept DCC urethane. Final coat was done by adding DCU2021 Clear and some DX685 Flattening agent, all of which is from PPG Paint.
