As mentioned in an earlier journal entry, I am using a Kugel under-dash brake and clutch master cylinder assembly. The problem was coming up with a secure mount for the unit. The fiberglass firewall was certainly not stiff enough to bolt the assembly directly to it, so I came up with the idea of building a steel framework that would attach to the firewall and provide a strong mounting point.
The first picture shows the mock-up of the assembly on the firewall. This part of the firewall is fairly thin and not suitable to mount anything to.
The second picture shows some 1" square wood that I used to get an idea of how to build the framework.
The last picture shows the frame as cut out of 1" square tubing ready to be welded together.
