Hot Rod Forum banner
Cancel
early mockup of Ford steering box
Decided to not cut up a good steel hood. Start of mold for hood scoop. An old broken plastic base was taped to stock hood. Lite weight matte and som
Needs pin holes/air pockets repaired but looks good.
Fender from the mold. Rough trimmed, grease&wax remover, sanded, 2 coats of epoxy primer..
early mockup of Ford steering box
Bottom of foot well/firewall/door post.
Firewall after cleanup and replace inner wheel well/foot panels.
Rear panel. Bottom 4"was gone. 2 coats epoxy primer.
BOBCRMAN@aol.com

early mockup of Ford steering box

Report
Watch Add bookmark
There are no comments to display.

Media information

Album
Stud uh baker gasser?
Added by
[email protected]
Date added
View count
33
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top