Hot Rod Forum banner

Media added by ezinoregon

Navigation

  1. Member Galleries 45K
  2. Photo Journal 86K
  3. Hot Rod Shows 2K
    1. USA 1K
      1. Rhinebeck Show and Swap 35
      2. Bonny Eagle Car Show 45
      3. Fresno Autorama 42
      4. Maumee Super Street Car and Truck Show 11
      5. Tucson Chevy Show 14
      6. Mid-America Street Rod Nationals 14
      7. Portland Roadster Show 14
      8. Riverside Park Machines 19th Annual Car Show 6
      9. Boise Roadster Show 4
      10. Southwest Street Rod Nationals 7
      11. Gates Rubber Company Annual Car Show 25
      12. Syracuse Nationals 28
      13. Eureka Springs 2003 Car Show 28
      14. Bearing Burners 4th Annual Cruz-In 21
      15. Branson Missouri Cruise and Show 29
      16. NSRA Nationals East 8
      17. National Night Out 17
      18. Downeast Street Rod Run 12
      19. Goodguys 11th Lonestar Nationals 155
      20. Goodguys 13th Heartland Nationals 21
      21. Tontitown Rod Run 85
      22. Goodguys 17th Pacific Northwest Nationals 7
      23. Branson Super Cruise 157
      24. Port Orchard Car Show 72
      25. Farmington Arkansas 2005 Show 37
      26. Branson Missouri Super Summer Cruise 76
    2. Canada 41
    3. Australia 68
      1. Canberra Rod and Kustom Krooze 49
    4. UK 8
    5. Africa 429
      1. South Africa Nationals 2003 163
      2. Cars in the Park 2003 92
      3. Cars in the Park 2004 131
      4. South Africa Nationals 2005 43
Browse albums
Here in Escondido, Ca, parked at cruise in Grand, which happens every Friday night 4pm till 11pm,, This was the last event I took the truck to before

Here in Escondido, Ca, parked at cruise in Grand, which happens every Friday night 4pm till 11pm,, This was the last event I took the truck to before

  • 0
  • 0
Starting the project. Took the truck to my parents house, i don't have a place to work on it since I live in a townhome. My dad is going to help with

Starting the project. Took the truck to my parents house, i don't have a place to work on it since I live in a townhome. My dad is going to help with

  • 0
  • 0
With the sides removed we can now access the deck and remove that to see what we are working with. What needs to be done and what not

With the sides removed we can now access the deck and remove that to see what we are working with. What needs to be done and what not

  • 0
  • 0
Plywood coming off. Dry rotting out, definitely time to make the change.

Plywood coming off. Dry rotting out, definitely time to make the change.

  • 0
  • 0
Looking at what we need to do to put new wood down. We were looking at making a hose from the gas tank to license plate, using a flip down license pla

Looking at what we need to do to put new wood down. We were looking at making a hose from the gas tank to license plate, using a flip down license pla

  • 0
  • 0
purchased the new plywood. Measuring it out to get ti to fit. Making the cutouts to fit around the rail holes attached to the box frame.

purchased the new plywood. Measuring it out to get ti to fit. Making the cutouts to fit around the rail holes attached to the box frame.

  • 0
  • 0
with the plywood down, started sanding around the cutouts and other spots to ensure the plywood would sit nice and flush on the deck. Easier sanding

with the plywood down, started sanding around the cutouts and other spots to ensure the plywood would sit nice and flush on the deck. Easier sanding

  • 0
  • 0
painted the bottom of the plywood with coverall protection to keep the water from rotting the wood. protection ... protection .... protection ...

painted the bottom of the plywood with coverall protection to keep the water from rotting the wood. protection ... protection .... protection ...

  • 0
  • 0
there were some welds we had to grind off and we cut off two of the back rail holders. only going to have two. Using plywood to protect the paint from

there were some welds we had to grind off and we cut off two of the back rail holders. only going to have two. Using plywood to protect the paint from

  • 0
  • 0
welding some extra angle stops in place for added strength. Just to keep it a little more solid. I don't know how to weld ... but he does!!!!!!

welding some extra angle stops in place for added strength. Just to keep it a little more solid. I don't know how to weld ... but he does!!!!!!

  • 0
  • 0
checking everything cleaning a little to make sure all is good.

checking everything cleaning a little to make sure all is good.

  • 0
  • 0
painted the metal frame with coverall protection from water. No Rust For You!!!! Thats right !!!!!!

painted the metal frame with coverall protection from water. No Rust For You!!!! Thats right !!!!!!

  • 0
  • 0
once painted and dried,,, laid the plywood down and screwed it to the frame. all the edges are sanded so it would sit flush and flat on the frame. No

once painted and dried,,, laid the plywood down and screwed it to the frame. all the edges are sanded so it would sit flush and flat on the frame. No

  • 0
  • 0
Purchased red oak for the actual wood that will be the railing and deck. figured to be around $450 .... well they use linear foot to sell their wood

Purchased red oak for the actual wood that will be the railing and deck. figured to be around $450 .... well they use linear foot to sell their wood

  • 0
  • 0
having to cutout for the rail holders. cut the boards to fit length wise. Nice to be seeing some wood down!! IM LAYING WOOD HERE PEOPLE!!! .haha l

having to cutout for the rail holders. cut the boards to fit length wise. Nice to be seeing some wood down!! IM LAYING WOOD HERE PEOPLE!!! .haha l

  • 0
  • 0
still positioning the wood... cut out for the gas tank filler hose ... by the way ... the ordeal I had at O'Reilly's Auto parts to get that gas appro

still positioning the wood... cut out for the gas tank filler hose ... by the way ... the ordeal I had at O'Reilly's Auto parts to get that gas appro

  • 0
  • 0
spraying out the back getting ready to lay down the boards and glue them down .. keeping it clean , keeping it real ... clean ..

spraying out the back getting ready to lay down the boards and glue them down .. keeping it clean , keeping it real ... clean ..

  • 0
  • 0
Starting top clamp the wood down. Used liquid nails on the edges and the deck. once glued and in place, clamped them down and together then wiped away

Starting top clamp the wood down. Used liquid nails on the edges and the deck. once glued and in place, clamped them down and together then wiped away

  • 0
  • 0
continued to add on each week. Scheduling is such that only could get there on Saturdays, so its taking longer. this is the period where sometimes it

continued to add on each week. Scheduling is such that only could get there on Saturdays, so its taking longer. this is the period where sometimes it

  • 0
  • 0
sanding some of the boards edges that were sticking up slightly. There was a little bow in some of the boards. We made the seams nice and even and

sanding some of the boards edges that were sticking up slightly. There was a little bow in some of the boards. We made the seams nice and even and

  • 0
  • 0
One of our short days, waiting for the glue. Looked into the steering issue I had. It always had a little play in ti, but the last few times I drove i

One of our short days, waiting for the glue. Looked into the steering issue I had. It always had a little play in ti, but the last few times I drove i

  • 0
  • 0
Used wedges on the outside of the deck to push them together firmer. keep em tight.

Used wedges on the outside of the deck to push them together firmer. keep em tight.

  • 0
  • 0
We had a heat wave that rolled in during the week. Had kept it covered with plastic and a tarp and truck cover. the heat actually cracked the liquid n

We had a heat wave that rolled in during the week. Had kept it covered with plastic and a tarp and truck cover. the heat actually cracked the liquid n

  • 0
  • 0
Re-glued // re-clamped .. another day of waiting for the glue to set.

Re-glued // re-clamped .. another day of waiting for the glue to set.

  • 0
  • 0
this took the longest at this point in the project ... once glued all you could do is wait .. and wait .... and wait ..... and ...... wait

this took the longest at this point in the project ... once glued all you could do is wait .. and wait .... and wait ..... and ...... wait

  • 0
  • 0
Top