Hot Rod Forum banner
Wires lashed, ready for final soldering

Wires lashed, ready for final soldering

Here the two 12AWG wires are lashed together with a small pure copper solid wire. All that remains is to heat this up and flow a bit more solder on to complete the splice. The lash wire should be fully tinned, but still visible when the splice is soldered. BTW, I actually wrapped the lashing 2 more turns before soldering this one.
There are no comments to display.

Media information

Category
Member Galleries
Album
Chevrolet Straight six 250 alternator upgrade.
Added by
Racer-X-
Date added
View count
7
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
BLU B130DL
Aperture
ƒ/2
Focal length
2.8 mm
Exposure time
6248000/1000000000
ISO
100
Filename
IMG_20220914_144913.jpg
File size
2.2 MB
Date taken
Wed, 14 September 2022 2:49 PM
Dimensions
3264px x 2448px

Share this media

Top