Hot Rod Forum banner

1957

  1. 1957 Chevy Truck part needed

    Body - Exterior
    Hello! thanks for letting me join. I have a 57 chevy pickup im about 1/2 done with building into a street rod. LS1 with a 4l80e and a 9 inch, etc... my problem is that the previous builder, who died and i am the new builder, removed some pretty hard to find parts off of the frame to powder coat...
  2. roller bearings for 57chevy truck

    Suspension - Brakes - Steering
    Hi, I would like to change the ball bearings in my 57 3100 truck to roller bearings. The truck was converted to 5 lug in the past. It appears that the drum-hub is from a early 50s chevy car. Does anyone know if the truck bearings will fit the car hubs? Or will the car bearings fit the truck...
  3. Chevy 235 wont fire

    Engine
    Hi i went out to start my 57' Chevy 3100 the other morning and it tried and tried but there was no fire. I checked the coil and there is power going into it but nothing coming out of it. I replaced the coil and still had the same problem. Even tried another coil that my buddy had and still...
  4. 1956 Chevy Pickup frame swap advice

    Suspension - Brakes - Steering
    So I have this 1956 Chevy 3100 swb that currently has what appears to be a 1975 4wd frame underneath it. I am looking to swap it out and turn it back into a 2wd with modernized running gear underneath it. I was thinking the best way to do this would be to find a complete modern frame to throw...
Top