Hot Rod Forum banner

302

  1. 85' non-mustang stock 302 cam spec?

    Engine
    Hey guys, Wondering if anyone has the specs for the 1985 302 camshaft. I cant find anywhere that actually states the specs of non-mustang 85 blocks. Or even pre roller specs for the ford lineups really..
  2. The right torque rich cam for SBF 302

    Engine
    Hey guys, stuck between two cams from Howards and am looking for a high torque cam that can pull to 5000 ish. Would have a 2000 stall converter headers, aftermarket intake etc, 3.55 to 3.73 gears (not sur yet), on more or less a 4000lb vehicle. Largely street driven. Cam 220235-10S: Duration...
  3. Sbc 3892657

    Engine
    Hey everyone! I'm new to forums but can use the help. I just purchased a SBC off a family member which I believed to be a 327. When I checked the casting numbers 3 types of motors show up with the same casting. 302.327 & 350. I have the Front VIN numbers also. First set are: L7157568 second set...
  4. Roller-ready block on 85' Crown Vic 302?

    Engine
    Hey guys, I'm wondering if there is anyway to tell if my 1985 crown vic is roller ready or not. Its a 2 barrel carb, non HO 302. Preferably without taking it apart first... And if anyone has had success with the roller lifters designed specifically for non-roller blocks if it comes to it. I...
  5. Holley carb won't idle

    Hotrodding Basics
    Hello there guys. last week I found my head gasket had blown out on my SBF 302. So I tore it down replaced the head gaskets, intake manifold gasket, and changed all of the fluids. I fired it up and it runs only if I stay on the throttle. as soon as you let go of the throttle it dies. I did...
  6. change motors

    Engine
    I want to put a 302 in place of a 3.0 , in a 2003 ford ranger edge pickup. what all do I have to change ? thanks
  7. Building a Small block Ford

    Hotrodding Basics
    I'm making plans to to build either a 289 or a 302 with a manual tranny for my 1962 comet. The 170 six just isn't blowing my skirt up. My question is, which engine would I get the most out of for the least amount of money? Which would be a better ending product? Ideas for a build? Originality...
  8. Welcome me!

    Introduce Yourself
    Hello fellow Hot Rodders! My name is Derek and i came to this site seeking information on how to conveniently swap a 1970 302 into a 1990 ranger, i've read the threads, but still am looking for a more simplified "list" So...Ill be doing some more research, starting my own Subject, and keeping up...
  9. Abs question

    Suspension - Brakes - Steering
    Does anybody know what would happen if I put new axles in without an abs ring? I have a 95 mustang gt and I'm thinking about replacing my old ones for some alloys but I don't want to go through pressing on new rings if I don't need them. I know it won't be as safe but I just need to know if the...
  10. demolition derby engine

    Engine
    i am in the process of designing the perfect demolition derby engine for the sole purpose of demolition derby. so im not trying to build for tons of horsepower or torque. i have an idea in mind, just wanted to run it past you hot rodder and engine builders to get your input. the number one enemy...
  11. Ticking sound (lifter, rocker arm?)

    Hotrodding Basics
    I bought a vehicle with a Ford 302 in it last year. It had been sitting for about five years, from what I heard it was only started once in that period of time. Anyway, it runs fine but it has a ticking sound. The previous owner thinks it's a hydraulic lifter. We tried some transmission fluid...
Top