Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Hotrodding Basics
    So I've been planning on buying a 1980s Foxbody mustang and have an engine lined up that I wanted to swap into it. I bought a 1990 F-250 Lariat that came with a Ford 460 and I was hoping to pull the engine and drop it in a Stang but now I'm being told it's a bad idea and that it won't handle the...
  2. Engine
    hi i have a carb off of a 1979 ford 460 its marked 80457-2 2229 on the air horn just wondering the cfm thank you.
  3. Electrical
    I have a 65 F100 with a 460 in it, and we put a new starter on it, and wired it to the solenoid but it won't crank over. There are 12 volts at the battery side and the starter side of the solenoid so I don't think it is bad. When you turn the key to start, the only thing that happens is the...
  4. Engine
    I have a 73 F150 and am considering an EFI 460 swap as I have two of them laying around and the wiring harnesses brain boxes etc... from 88 and 89 models. What I know so far is these engines are farily low powered due to lower compression. I just need some good information if there is a way to...
  5. General Rodding Tech
    Hello, Looking for recomendations for the brand and model of headers that builders have used. I have a 460 in mine and would like to put in full length tuned headers. Any ideas besides using shorty huggers??? Thanks
1-5 of 5 Results
Top